Index of /Photos/Eighteen. Steel Motor Boat

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[IMG]2nd side tacked on_1748097454.jpg2023-12-02 15:38 81K 
[IMG]3 sheets 6mx2mx3mm_1488877236.jpg2023-12-02 15:38 118K 
[IMG]Anchor roller leading edges stainless_1845066848.jpg2023-12-02 15:38 59K 
[IMG]Assembling keel_712033292.jpg2023-12-02 15:38 83K 
[IMG]Avast there me hearties..._1074478844.jpg2023-12-02 15:38 88K 
[IMG]Bollards and plates ready to galvanise_1675445242.jpg2023-12-02 15:38 72K 
[IMG]Bow rollers hand turned HDPE_506021146.jpg2023-12-02 15:38 54K 
[IMG]Bow welded. Pulling together._1316080950.jpg2023-12-02 15:38 115K 
[IMG]Bulwark cap and first stringer_38134617.jpg2023-12-02 15:38 123K 
[IMG]Deck_hull welding finished__493266513.jpg2023-12-02 15:38 69K 
[IMG]Designed to fit rollers_2084158357.jpg2023-12-02 15:38 75K 
[IMG]Fairing keel side 3_16in plate_302226285.jpg2023-12-02 15:38 115K 
[IMG]Fairleads and Scuppers cut._1368259920.jpg2023-12-02 15:38 56K 
[IMG]Footwell goes in._1494976895.jpg2023-12-02 15:38 62K 
[IMG]Footwell scuppers 316_508453656.jpg2023-12-02 15:38 75K 
[IMG]Foredeck beams on_47802043.jpg2023-12-02 15:38 96K 
[IMG]Foredeck ready_506759897.jpg2023-12-02 15:38 112K 
[IMG]Going well._77046461.jpg2023-12-02 15:38 95K 
[IMG]Half a boat__950892366.jpg2023-12-02 15:38 92K 
[IMG]I hope it is strong enough._1270610591.jpg2023-12-02 15:38 65K 
[IMG]It will go up..._277714849.jpg2023-12-02 15:38 116K 
[IMG]Keel. Stern tube and cooling p_1151012487.jpg2023-12-02 15:38 116K 
[IMG]Keel Shoe 1_2in plate_574927473.jpg2023-12-02 15:38 146K 
[IMG]Keel nose half Galv_ pipe_228516531.jpg2023-12-02 15:38 69K 
[IMG]Keel shoe cut out and ground_1596449550.jpg2023-12-02 15:38 82K 
[IMG]Lining bow edges up_1218776046.jpg2023-12-02 15:38 80K 
[IMG]Lofting hull on paper_2041861126.jpg2023-12-02 15:38 45K 
[IMG]Lorry strap pulling in bow_1665188869.jpg2023-12-02 15:38 110K 
[IMG]More welding_330412102.jpg2023-12-02 15:38 98K 
[IMG]Pilot house front tacked_45927564.jpg2023-12-02 15:38 72K 
[IMG]Pilot house going up_889009459.jpg2023-12-02 15:38 103K 
[IMG]Plywood anchor_399145012.jpg2023-12-02 15:38 116K 
[IMG]Port side coming together_1101695405.jpg2023-12-02 15:38 136K 
[IMG]Pulling bow in. Angle and cramps_271464105.jpg2023-12-02 15:38 103K 
[IMG]Pushing decks onto footwell_546084157.jpg2023-12-02 15:38 100K 
[IMG]Quarter decks going in_214181720.jpg2023-12-02 15:38 90K 
[IMG]Quarter inch out..._1490935987.jpg2023-12-02 15:38 59K 
[IMG]Rain stopped play!_344359463.jpg2023-12-02 15:38 82K 
[IMG]Ready for stringers_bulwark_1548136771.jpg2023-12-02 15:38 122K 
[IMG]Ready for transom_973912574.jpg2023-12-02 15:38 105K 
[IMG]Rudder fittings for Galvanising_13921035.jpg2023-12-02 15:38 68K 
[IMG]Rudder ready for cutting_978823739.jpg2023-12-02 15:38 64K 
[IMG]Stern quarter deck template_2067016965.jpg2023-12-02 15:38 78K 
[IMG]Taking the twist out; strap to tree_1649255665.jpg2023-12-02 15:38 95K 
[IMG]That's a boat_402015334.jpg2023-12-02 15:38 109K 
[IMG]The same angle each side..._845561813.jpg2023-12-02 15:38 88K 
[IMG]Transom tacked in_184431878.jpg2023-12-02 15:38 76K 
[IMG]Trimming Cupola with oxy_462598157.jpg2023-12-02 15:38 100K 
[IMG]Two tabs welded_391951553.jpg2023-12-02 15:38 113K 
[IMG]Using paper template_2051426851.jpg2023-12-02 15:38 75K 
[IMG]We have a hull._2065985651.jpg2023-12-02 15:38 97K 
[IMG]Welding as we go_482974941.jpg2023-12-02 15:38 107K 
[IMG]Winch showing stainless rim_346363427.jpg2023-12-02 15:38 71K 
[IMG]Wood for rudder_2056499983.jpg2023-12-02 15:38 131K 
[IMG]sophisticated deck beam jig_1688653289.jpg2023-12-02 15:38 141K 
Apache/2.4.52 (Ubuntu) Server at www.origamiboats.org Port 80